LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Install the brake master cylinder reservoir to the master cylinder if it was removed previously. See MASTER CYLINDER RESERVOIR  .
  2. Bench bleed the master cylinder. See MASTER CYLINDER BENCH BLEEDING  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
  3. Install the master cylinder to the vacuum brake booster. Install the brake master cylinder mounting nuts. Tighten the brake master cylinder mounting nuts to specification. See TORQUE SPECIFICATIONS  .
  4. Remove the plugs from the brake pipes. Install the brake pipes to the master cylinder. Tighten the brake pipe fittings at the master cylinder to specification. See TORQUE SPECIFICATIONS  .
  5. Connect the electrical connector to the brake fluid level sensor. Bleed the hydraulic brake system. See MANUAL BLEEDING  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
scientia non olet · About LEMON Manuals