LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Hydraulic Brake Booster >> Removal

Hydraulic Brake Booster: Removal

  1. Disconnect the battery negative cable. Place the vehicle on a level surface. Block the front wheels. Apply the parking brake.
  2. Disconnect the power steering inlet hose. Disconnect the power steering pressure hose. Disconnect the power steering gear to booster hose. See appropriate POWER STEERING article in STEERING.
  3. Remove the master cylinder. See MASTER CYLINDER  . Remove the wiring harness bracket. Remove the spacer from the booster assembly.
  4. Remove the left closeout insulator panel. Remove the left knee bolster. Remove the left knee bolster bracket.
  5. Remove the vacuum brake booster retainer clip from the brake pedal clevis pin. Remove the foam spacer from the brake pedal clevis pin. Disconnect the vacuum brake booster push rod from the brake pedal clevis pin.
  6. Remove the vacuum brake booster mounting nuts from the brake pedal assembly. Remove the vacuum brake booster assembly. Remove the vacuum brake booster mounting gasket, if gasket replacement is necessary.
scientia non olet · About LEMON Manuals