LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Front Brake Hose >> Removal

Front Brake Hose: Removal

  1. Raise and suitably support the vehicle. Remove the tire and wheel assembly. Clean all dirt and foreign material from the brake hose and the brake pipe fittings.
  2. Remove the brake pipe fitting from the brake hose. Use a flat-bladed tool in order to remove the brake hose retainer from the brake hose. Remove the brake hose from the brake hose bracket.
  3. Remove the brake hose bolt from the brake caliper. Remove the brake hose from the brake caliper. Remove and discard the two copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end. Install a rubber plug into the brake hose bolt hole of the brake caliper in order to prevent brake fluid loss and contamination.
  4. Remove the hose bracket bolt from the strut assembly and remove the hose.
scientia non olet · About LEMON Manuals