LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Front Brake Hose >> Installation

Front Brake Hose: Installation

  1. Remove the rubber plug from the brake hose bolt hole of the brake caliper. Assemble the brake hose bolt and the NEW copper brake hose gaskets to the brake hose. Install the brake hose bolt to the brake caliper. Tighten the brake hose bolt to specification. See TORQUE SPECIFICATIONS  .
  2. Install the brake hose to the brake hose bracket. Install the brake hose retainer to the brake hose. Remove the rubber cap or plug from the exposed brake pipe fitting end. Install the brake pipe fitting to the brake hose. Tighten the brake pipe fitting to specification. See TORQUE SPECIFICATIONS  .
  3. Install the hose bracket and bolt to the strut assembly. Bleed the brake caliper at the brake caliper bleeder screw. See MANUAL BLEEDING  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
  4. Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals