LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2001 >> Catera >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Diagnostic Tests >> DTC 051 Or 052: Reprogram Cluster Or Cluster Malfunction >> Testing

DTC 051 Or 052: Reprogram Cluster Or Cluster Malfunction: Testing

  1. If instrument panel cluster diagnostic system check has been performed, go to next step. If instrument panel cluster diagnostic system check has not been performed, go to INSTRUMENT PANEL CLUSTER DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
  2. Connect scan tool to Data Link Connector (DLC). DLC is located under left side of instrument panel. Using scan tool, select PROGRAMMING from SPECIAL FUNCTIONS menu. Reprogram Instrument Panel Cluster (IPC). See INSTRUMENT CLUSTER PROGRAMMING/SYNCHRONIZATION  under PROGRAMMING. If programming is not successful, go to next step. If programming is successful, go to step  4 .
  3. Replace IPC. See INSTRUMENT PANEL CLUSTER  under REMOVAL & INSTALLATION. After repairs are made, go to next step.
  4. Using scan tool, clear IPC DTCs. Operate system verifying repair. If system operates normally, testing is complete. If system does not operate normally, go to step  2 .
scientia non olet · About LEMON Manuals