Brake Shoes &/Or Pads: Remove & Replace
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 1.8 | B | ||
| Front,Both Sides | 1.0 | B | ||
| Rear,Both Sides | 1.0 | B | ||
| Combination Procedure: AXLE SEAL: Replace: Semi-Floating Axle. | ||||
| Rear,Both | 0.8 | B | ||
| Rear,One Side | 0.6 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed System. | ||||
| Each Additional | 0.2 | B | ||
| One | 0.5 | B | ||
| Combination Procedure: CALIPER: Overhaul: Includes: Bleed System. | ||||
| One | 0.7 | B | ||
| Combination Procedure: CALIPER: Replace: Includes: Bleed System. | ||||
| One | 0.5 | B | ||
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: Includes: Repack Wheel Bearings (where applicable). | ||||
| RWD, Each | 0.3 | B | ||
| Combination Procedure: DISC ROTOR: Replace: Includes: Repack Wheel Bearings (where applicable). | ||||
| RWD | 0.4 | B | ||
| Combination Procedure: PARKING BRAKE SHOE & LINING: Replace: | ||||
| Each Side | 0.2 | B | ||
| Combination Procedure: WHEEL BEARING: Replace: Includes: Repack Wheel Bearings (where applicable). | ||||
| RWD, Front,One Side | 0.5 | B | ||
| RWD, Rear,One Side | 1.0 | B | ||