LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2000 >> Escalade >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Front Suspension - 4WD Torsion Bar - "K" Series - New Style) >> Removal & Installation >> Upper Ball Joint >> Removal (Except Pickup)

Removal (Except Pickup)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2000 GMC Yukon XL, 2000 GMC Yukon, 2000 GMC Sierra, 2000 Chevrolet Tahoe, and 2000 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. Remove wheel and tire assembly. Remove upper control arm. See UPPER CONTROL ARM.  Using a press, remove ball joint.