Stabilizer Bar: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2000 GMC Yukon XL, 2000 GMC Yukon, 2000 GMC Sierra, 2000 Chevrolet Tahoe, and 2000 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Keep right and left side stabilizer bar components separate for installation in original locations.

Raise and support vehicle. Remove wheel and tire assembly. Remove fasteners and separate stabilizer bar from frame. Remove stabilizer bar. Remove stabilizer bar bushings. Replace bushings if deformed or deteriorated. Replace stabilizer bar and clamps if excessively worn or damaged.