Removal (K3)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2000 GMC Yukon XL, 2000 GMC Yukon, 2000 GMC Sierra, 2000 Chevrolet Tahoe, and 2000 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Remove lower control arm. See LOWER CONTROL ARM . Place lower control arm in a soft-jaw vise. Use a punch to unbend crimps on front bushing. Press bushings out of lower control arm using Ball Joint "C" Clamp (J-9519-23) and Control Arm Bushing Service Set (J-36618).