Right Rear Door Ajar (143)

The RH Rear Door Module (RRDM) supplies ignition voltage to the RH rear door jamb switch via circuit 747 (BLK/WHT). The RRDM monitors this circuit at connector C2 terminal B, if the RH rear door is ajar/open the switch closes and circuit 747 (LT BLU/BLK) is grounded via circuit 451 (BLK/WHT). The RRDM detects this ground condition and sends a door ajar/open status (serial data) message via the Simple Data Interface (SBI) to the LFDM. The LFDM detects this door open/ajar message and sends a class 2 serial data message to the IPC requesting that this message is displayed. If the vehicle speed is greater than 4.8 km/h (3 mph) the IPC displays the message and request the radio via a class 2 message to activate a multiple medium chime.