Removal & Installation
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2000 GMC Yukon, 2000 GMC Savana Special, 2000 GMC Savana Camper Special, 2000 GMC Savana, and 2000 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove instrument cluster trim plate by pulling up at left corner to disengage retainers, then pull at top to remove trim plate. Place tilt steering column all the way down, if equipped. Remove instrument cluster retaining screws. See Fig 1. Remove instrument cluster. To install, reverse removal procedure.