Suspension Support: Removal
- Raise and support vehicle. Remove wheel and tire assemblies.
- Remove rear suspension components as required. Remove the intermediate parking brake cable from the equalizer and move the intermediate cable clear of the suspension support.
- Remove the rear brake crossover pipe and the left rear brake hose from the bracket. Disconnect the rear chassis wiring harness from the main body wiring harness.
- Support the rear suspension support with suitable jackstand. Remove the suspension support forward arm bolts, upper mounting bolts and lower insulators. See Figure.
- Lower the jackstand and remove support assembly.
CAUTION:
While lowering the support, carefully watch the position of the brake hoses and crossover pipes in order to prevent damage during the removal procedure.