LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1998 >> Seville STS >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic CV Road-Sensing >> Adjustments >> Calibrating CVRSS Control Module

Calibrating CVRSS Control Module

NOTE: To ensure NEW CVRSS control module is calibrated for specific vehicle, Code C1658 is stored in memory. After replacing CVRSS control module, it must be calibrated. If NEW CVRSS control module is not calibrated, code cannot be cleared.

Ensure Tech 1 scan tool is equipped with latest version of chassis application program. Turn ignition off. Connect Tech 1 scan tool to Data Link Connector (DLC). Turn ignition on, engine off. To calibrate CVRSS control module, follow instructions on Tech 1 scan tool. Perform ELC trim height and steering autocenter adjustments. See ELC TRIM HEIGHT  and STEERING AUTOCENTER  .

scientia non olet · About LEMON Manuals