Low Coolant Indicator Inoperative
- Perform INSTRUMENT CLUSTER DIAGNOSTIC SYSTEM CHECK under TROUBLE SHOOTING. Go to next step.
- Turn ignition switch to ON position. Disconnect cooling fluid maximum capacity sensor connector. See COMPONENT LOCATIONS . If indicator light comes on, go to next step. If indicator light does not come on, go to step 4).
- Replace cooling fluid maximum capacity sensor. Go to INSTRUMENT CLUSTER DIAGNOSTIC SYSTEM CHECK .
- Check for short to ground in Brown/Blue wire between cooling fluid maximum capacity sensor and gauge cluster. Repair as necessary. If circuit is okay, replace and program the instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Go to INSTRUMENT CLUSTER DIAGNOSTIC SYSTEM CHECK .