LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1996 >> Seville SLS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Parking Brake Release Valve >> Models With Console Shift

Models With Console Shift

  1. Remove upper cover from center console for access to release valve. See Figure . Place shift lever in Neutral. Loosen release valve screws. Rotate release valve on shift lever assembly to align adjustment reference hole in carrier tang.
  2. Insert a gauge pin (paper clip or similar object) in adjustment reference hole to keep holes aligned while tightening screws. Tighten screws. Remove gauge pin.
  3. Check parking brake release system for proper operation. With ignition on, parking brake should hold in Park or Neutral, and release in Drive or Reverse. With ignition off, parking brake should hold with transaxle in any position. Install upper cover on center console.
scientia non olet · About LEMON Manuals