RSS System Check
- Turn ignition on. Note all messages on instrument panel cluster. Enter diagnostics. See USING SELF-DIAGNOSTICS under SELF-DIAGNOSTICS. If diagnostics can be entered, go to next step. If diagnostics cannot be entered, problem exists in instrument panel cluster. See INSTRUMENT PANEL article in ACCESSORIES/SAFETY EQUIPMENT section.
- Record codes (if present). If no codes are present, go to next step. If codes are present, go to appropriate code for diagnosis.
- If SERVICE RIDE CONTROL message is displayed, go to NO RSS DATA, LOSS OF SERIAL COMMUNICATION . If SERVICE RIDE CONTROL message is not displayed, problem is no longer present. Go to NOTES ON INTERMITTENTS under SELF-DIAGNOSTICS.