LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1995 >> Eldorado Base >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic (Road Sensing) >> Adjustments >> Steering Sensor Trim Position

Steering Sensor Trim Position

NOTE: This procedure requires a Tech 1 scan tester.
  1. Enter diagnostics. See USING DIAGNOSTICS  under SELF-DIAGNOSTICS. Check for steering sensor Code S080. If code is set, repair before continuing. See STEERING SYSTEM - VARIABLE EFFORT article in STEERING. Ensure wheels are in straight-ahead position.
  2. Check RSS data value for steering sensor (SD15). If value is not 2-3 volts, realign sensor. If value is 2-3 volts, turn ignition off. Connect Tech 1 scan tester to Data Link Connector (DLC). Turn ignition on, engine off. To adjust steering sensor trim position, follow instructions on Tech 1 scan tester.
scientia non olet · About LEMON Manuals