Manually Selecting IPC SNAPSHOT?

If no code-set snapshot information is available or stored trouble codes are by-passed until TAKE SNAPSHOT? is displayed, a manually-triggered snapshot may be taken. Operate vehicle until intermittent condition occurs or until desired conditions are met to be viewed and recorded by technician. When TAKE SNAPSHOT? is displayed, press "HI" on CCC panel. Display will read SNAPSHOT TAKEN and then change to SNAP DATA. This indicates data is now stored for review. This selection will store one set each of IPC DATA and IPC INPUT parameter values at moment snapshot was taken. This process will help to diagnose intermittent problems. To view information, see VIEWING SNAP DATA? OR IXXX DATA? DISPLAY.