Cylinder Head Gasket: Remove & Replace
Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applicable) and clean and adjust Spark Plugs.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both | 11.0 | 8.2 | B | |
| Left | 8.6 | 6.5 | B | |
| Right Side | 8.9 | 6.8 | B | |
| Additional Procedure: CYLINDER HEAD GASKET: Remove & Replace: | ||||
| Where Cruise Control interferes add | 0.2 | B | ||