Headlamp Dimmer Switch: Service and Repair

Fig. 2 Ignition & dimmer switch removal. Models less tilt column:

Fig. 3 Ignition & dimmer switch removal. Models with tilt column:

1. Remove steering wheel as outlined under ``Steering Wheel, Replace'' procedure, then the turn signal switch and lock cylinder as previously described.
2. Refer to Figs. 2 and 3 to remove ignition and dimmer switches.
3. When installing dimmer switch, depress switch slightly and install a 3/32 drill into switch. Force switch upward to remove lash and tighten retaining screw.