Removal & Installation (Eldorado & Seville)
- Disconnect battery ground. Remove 4 retaining screws and bezel. Remove 4 screws on warning lamp lenses, then 6 screws on cluster lens. Remove lenses and retainer. Remove 2 attaching screws and position shift indicator out of way. Remove 2 attaching screws and coolant indicator. Remove 2 attaching screws and fuel gauge.
- Remove 4 attaching screws and pull out speedometer head and dial. Using a small screwdriver, unclip trip odometer reset stem extension knob from speedometer head. Pull speedometer head out of cluster and remove screw attaching speed sensor to head and remove head. To install, reverse removal procedure.