LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1983 >> Eldorado 5.7 N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L V8 Diesel - VIN [N] >> Overhaul >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold as previously described. Remove rocker arm cover(s). Loosen or remove any accessory brackets which interfere with cylinder head removal. Disconnect glow plug wiring and ground strap from right head. Remove rocker arm bolts, pivots, rocker arms and push rods. Keep removed parts separate for installation in original locations.
  2. Disconnect exhaust manifold(s) from cylinder head(s), leaving manifold(s) attached to crossover pipe. Remove engine block drain plug(s) from same side as cylinder head(s) is being removed. Remove head bolts and remove cylinder head(s). If necessary to remove prechamber, remove glow plug and injection nozzle, then tap out with small drift punch.
scientia non olet · About LEMON Manuals