LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1983 >> Eldorado 5.7 N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L V8 Diesel - VIN [N] >> Overhaul >> Cylinder Head >> Installation

Cylinder Head: Installation

  1. Install head gasket WITHOUT sealer and with prechamber shield facing cylinder head. Install prechamber flush with cylinder head. It must not protrude or be recessed more than .004" (.10 mm).
  2. Install glow plug, injection nozzle and cylinder head. Clean and dip cylinder head bolts in engine oil and install. Tighten in 2 steps, following sequence shown in Fig 1. Reverse removal procedure to complete installation.
Fig 1: Cylinder Head Tightening Sequence Tighten head bolts in 2 steps.
G73275
scientia non olet · About LEMON Manuals