Alternator Indicator
- Alternator lamp should be on when ignition is "ON" and engine is not running. If lamp is on with ignition "OFF", disconnect leads from alternator 1 and 2 terminals. If lamp stays on, leads are shorted. If lamp goes out, replace rectifier bridge in alternator.
- If lamp does not come on with ignition "ON" and engine stopped, check bulb, fuse, and wire from ignition switch to terminal 1 at alternator. If no problems are found, check for shorts between terminals 1 and 2, and replace rectifier.
- If lamp stays on with engine running, check for blown A/C fuse. If fuse is good, check belts and alternator.