Brake Caliper: Disassembly
- Clean exterior of caliper with denatured alcohol and place on a clean work surface. Remove brake hose and discard copper gasket. Drain fluid from caliper.
- Using clean shop towels to pad interior of caliper, apply compressed air to caliper inlet and remove piston.CAUTION: Use only enough air pressure to ease piston out of bore.
- Using a screwdriver, pry boot out of caliper. Pry piston seal from caliper using a piece of wood or plastic.CAUTION: Do not use a metal tool to remove piston seal as bore may be damaged.
Remove bleeder valve from caliper.