Circuit/System Testing
- Ignition - On / Vehicle - In Service Mode
- Program the component:P29 Head-Up Display
- Verify the DTC does not set.
- If the DTC is not set
All OK.
- Go to next step: If the DTC sets
- If the DTC is not set
- Replace the component:P29 Head-Up Display
- Verify the DTC does not set.
- If the DTC is not set
All OK.
- Go to next step: If the DTC sets
Go to next step: Replace the component:P16 Instrument Cluster
- If the DTC is not set