Engine Oil Pressure Sensor and/or Switch Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callout items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Generator Replacement (LFY)
1	Engine Oil Pressure Sensor and/or Switch CAUTION: Refer to Component Fastener Tightening Caution . Procedure Disconnect the oil pressure sensor electrical connector. Transfer components as necessary. Tighten 20 N.m (15 lb ft)

Callout

Component Name

Engine Oil Pressure Sensor and/or Switch

CAUTION:

Procedure

Tighten
20 N.m (15 lb ft)