Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify DTC B361A 4B is not set
- If DTC B361A 4B is set
- Program the control module: P16 Instrument Cluster
- Verify the DTC does not set.
- If the DTC sets
Test or replace the component: P29 Head-Up Display
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.
- Go to next step: If DTC B361A 4B is not set
- Verify DTC B361A 39 is not set
- If DTC B361A 39 is set
Test or replace the component: P29 Head-Up Display
- Go to next step: If DTC B361A 39 is not set
- If DTC B361A 39 is set
- All OK.