Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify the component activates: Radio Speaker The balance and fade controls can be used to help isolate an inoperative speaker or poor sound condition.
- If the component does not activate
Refer to: Speaker Malfunction , or Speaker Malfunction , or Speaker Malfunction (IOR) .
- Go to next step: If all components operate
- If the component does not activate
- Headlamp Switch - Off
- Verify the scan tool parameter: Headlamp Switch Signal = OFF (or Inactive)
- If not the specified state
Refer to: Headlamps Malfunction
- Go to next step: If the specified state
- If not the specified state
- Turn Signal Switch - Off
- Verify the scan tool parameter: Left Turn Signal Switch & Right Turn Signal Switch = Inactive
- If not the specified state
Refer to: Park, License, and/or Tail Lamps Malfunction (Without Y6S) , or Park, License, and/or Tail Lamps Malfunction (With Y6S)
- Go to next step: If the specified state
- If not the specified state
- All OK.