LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2021 >> Envision Essence, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Diagnostic Information and Procedures >> DTC P0521, P0522, or P0523 >> Circuit/System Verification

Circuit/System Verification

  1. Verify correct engine oil level and condition.
  2. Ignition ON/Vehicle in Service Mode.
  3. Verify the scan tool Engine Oil Pressure parameter is 0 psi (0 kPa).
    • If not 0 psi (0 kPa) 

      Refer to Circuit/System Testing.

    • Go to next step: If 0 psi (0 kPa) 
  4. Engine running.
  5. Verify actual engine oil pressure is within specified range. Refer to Oil Pressure Diagnosis and Testing in Displays and Gauges Component Replacement Reference .
  6. Verify the scan tool Engine Oil Pressure parameter is within specified range.
    • If not within specified range 

      Refer to Circuit/System Testing.

    • Go to next step: If within specified range 
  7. Verify the engine oil pressure displayed on the P16 Instrument Panel Cluster Control Module is within specified range.
    • If not within specified range 

      Test or replace the P16 Instrument Panel Cluster Control Module.

    • Go to next step: If within specified range 
  8. All OK.
scientia non olet · About LEMON Manuals