Installation Procedure

Rear Brake Hose - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Install NEW [ 2x ]
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Hose Fitting Bolt (1) - Install and tighten 44 N.m (32 lb-ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Bracket Nut (1) - Install and tighten 9 N.m (80 lb/in)
Courtesy of GENERAL MOTORS COMPANY

Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb-ft)
Bleed the brake system.
Hydraulic Brake System Bleeding (Manual) , or

Hydraulic Brake System Bleeding (Pressure) .
Install the tire and wheel assembly. Tire and Wheel Removal and Installation