LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2021 >> Enclave Premium, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Front Brake Hose Replacement >> Installation Procedure

Installation Procedure

  1. GM5598948Courtesy of GENERAL MOTORS COMPANY

    Front Brake Hose (3) - Install

  2. Front Brake Hose Retainer (2) - Install
  3. Remove the cap from the brake pipe fitting.
    4. CAUTION:

    Fastener Caution

  4. Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb-ft)
  5. GM5596412Courtesy of GENERAL MOTORS COMPANY

    Remove the plug from the front brake caliper inlet.

  6. Front Brake Hose Fitting Gasket (2) - Install NEW [ 2x ]
  7. Front Brake Hose (3) @ Front Brake Caliper - Install
  8. Front Brake Hose Fitting (1) - Install and tighten 44 N.m (32 lb-ft)
  9. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
  10. Bleed the brake system.

    Hydraulic Brake System Bleeding (Manual) , or

    Hydraulic Brake System Bleeding (Pressure) .

  11. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
  12. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals