Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Accelerator Pedal with Position Sensor (1) - Install - Accelerator Pedal with Position Sensor Assembly Replacement
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Retainer (1) - Install NEW

NOTE:

Align the power brake booster pushrod with the brake pedal retainer.

Brake Pedal Assembly - Install
Position the brake and accelerator pedal assembly and secure the wire harness retainer.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Pedal Bracket Bolt (1) - Install and tighten [ 2x ] 15 N.m (11 lb-ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Bracket Bolt (1) - Install and tighten 15 N.m (11 lb-ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Retainer (1) Install
Brake Pedal (2) - Secure
Accelerator Pedal Position Sensor Electrical Connector - Connect
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Position Sensor (1) - Install - Brake Pedal Position Sensor Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Left Side (1) - Install - Front Floor Console Extension Panel Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator - Left Side (2) - Install - Instrument Panel Lower Trim Panel Insulator Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

Power Brake Booster Bolt (1) - Install and tighten [ 2x ] 22 N.m (16 lb-ft)
Reposition and install the radiator surge tank. Radiator Surge Tank Replacement