Rear Seat Removal and Installation

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Rear Seat Track Cover
2	Rear Seat Bolt [ 4x ] CAUTION: Refer to Fastener Caution . Tighten in sequence 45 N.m (33 lb-ft)
3	Rear Seat Procedure Disconnect electrical connections, if applicable. With the aid of an assistant remove the rear seat, by lifting and pulling the seat upward to disengage it from the floor.

Callout

Component Name

Rear Seat Track Cover

Rear Seat Bolt [ 4x ]

CAUTION:

Tighten in sequence
45 N.m (33 lb-ft)

Rear Seat

Procedure

Disconnect electrical connections, if applicable.
With the aid of an assistant remove the rear seat, by lifting and pulling the seat upward to disengage it from the floor.