Rear Bumper Fascia Energy Absorber Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Reposition the wiring harness.
1	Rear Bumper Fascia Energy Absorber Bolt [ 4x ] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb/in)
2	Rear Bumper Fascia Energy Absorber Procedure Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Rear Bumper Fascia Energy Absorber Bolt [ 4x ]

CAUTION:

Tighten
2.5 N.m (22 lb/in)

Rear Bumper Fascia Energy Absorber
Procedure
Transfer components as necessary.