LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2021 >> Enclave Avenir, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Secondary Latch Release Cable Replacement

Hood Secondary Latch Release Cable Replacement

GM4807618Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Intake Air Splash Shield Replacement
1 Hood Secondary Latch Release Cable Bolt [ 2x ]
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Hood Secondary Latch Release Cable

Procedure

  1. Disconnect the release cable from the hood primary latch.
  2. Disconnect the hood secondary latch release cable retainer from the bracket.
  3. Align the hood secondary latch release cable latch if necessary.
scientia non olet · About LEMON Manuals