Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Fender (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Headlamp Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
Front Fender Bolt (2) - Install and tighten [ 5x ] 9 N.m (80 lb in)
Front Fender Bolt (3) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Fender Nut (1) - Install and tighten 9 N.m (80 lb in)
Front Fender Bolt (2) - Install and tighten [ 4x ] 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Install - Front Bumper Fascia Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner (1) - Install - Front Wheelhouse Liner Replacement
Courtesy of GENERAL MOTORS COMPANY

Rocker Panel Molding (1) - Install - Rocker Panel Molding Replacement
Courtesy of GENERAL MOTORS COMPANY

Rear Tire Front Air Deflector (1) - Install - Rear Tire Front Air Deflector Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Fender Rear Air Deflector (1) - Install - Front Fender Rear Air Deflector Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Fender Upper Rear Molding (1) - Install -
Courtesy of GENERAL MOTORS COMPANY

Air Inlet Grille Panel (1) - Install - Air Inlet Grille Panel Replacement
Courtesy of GENERAL MOTORS COMPANY

Hood Rear Outer Air Inlet Seal (1) - Install - Hood Rear Outer Air Inlet Seal Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Inlet Grille Panel Extension (1) - Install - Air Inlet Grille Panel Extension Replacement (Left Side) , or Air Inlet Grille Panel Extension Replacement (Right Side)
Courtesy of GENERAL MOTORS COMPANY

Intake Air Splash Shield (1) - Remove - Intake Air Splash Shield Replacement