Removal Procedure
WARNING:
WARNING:
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
- Partially remove the rear wheelhouse liner enough to access the rear brake hose fitting. Rear Wheelhouse Liner Replacement
Brake Pipe Fitting (1) - Disconnect
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
Brake Hose Retainer (1) - Remove
Brake Hose Fitting Bolt (1) - Remove
Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Remove and DISCARD [2x]
- Plug the caliper inlet to prevent brake fluid loss and contamination.
Rear Brake Hose (1) - Remove