LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Regal GS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Front Brake Hose Replacement (JQ5) >> Removal Procedure

Removal Procedure

WARNING:

Brake Fluid Irritant Warning

WARNING:

Use of eye goggles is necessary to prevent personal injury.

CAUTION:

Brake Fluid Effects on Paint and Electrical Components Caution

  1. Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
  2. GM4723854Courtesy of GENERAL MOTORS COMPANY

    Front Brake Pipe Fitting (1) @ Front Brake Hose (3) - Remove

  3. Brake Hose Retainer (2) @ Front Brake Hose (3) - Remove
  4. Front Brake Hose (3) - Disengage
  5. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
  6. Cap the brake hose fitting to prevent brake fluid loss and contamination.
  7. GM4724687Courtesy of GENERAL MOTORS COMPANY

    Open (arrow b) the 2 brake hose retainers (1, 2) and move aside (arrows a)

  8. GM4724694Courtesy of GENERAL MOTORS COMPANY

    Front Brake Hose Bracket Bolt (2) @ Front Brake Hose (1) - Remove

  9. Front Brake Hose (1) - Disengage
  10. GM4724700Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Fitting Bolt (1) - Remove

  11. Front Brake Hose (2) - Remove
    12. NOTE:

    The front brake hose washers may stuck to the brake caliper and/or the brake hose end.

  12. Front Brake Hose Washer (3) - Remove and DISCARD [2x]
  13. Cap the brake hose fitting to prevent brake fluid loss and contamination.
  14. Cap the brake caliper inlet port to prevent brake fluid loss and contamination.
scientia non olet · About LEMON Manuals