Removal Procedure
WARNING:
- Place the ignition switch in the OFF position.
- Remove the battery. Battery Replacement (3.6L LGX)
- Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. Radiator Surge Tank Replacement
Clip (1) - Release
Clip (1) - Release
Master Cylinder Primary Brake Pipe Fitting (1) - Disconnect
- Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
Brake Pressure Modulator Valve Primary Pipe Fitting (1) - Disconnect
- Plug the BPMV inlet port to prevent brake fluid loss and contamination.
- Remove the brake pressure modulator valve primary pipe.