LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Regal GS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Sensor Replacement >> Installation Procedure

Installation Procedure

  1. GM4234167Courtesy of GENERAL MOTORS COMPANY

    Brake Fluid Level Sensor (1) - Install

  2. GM4234161Courtesy of GENERAL MOTORS COMPANY

    Ensure the brake fluid level sensor locking tab (1) is fully engaged.

  3. Connect the brake fluid level sensor electrical connector.
  4. Radiator Surge Tank Replacement - Install
scientia non olet · About LEMON Manuals