Removal Procedure

WARNING:

Refer to Brake Dust Warning .

WARNING:

Refer to Brake Fluid Irritant Warning .

Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Brake Pipe Fitting (1) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Retainer (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Fitting Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Do not reuse the brake hose fitting gaskets.

Brake Hose Fitting Gasket (1) [2x] @ Brake Hose Fitting (2) - Remove and DISCARD
Plug the caliper inlet to prevent brake fluid loss and contamination.
Remove the brake hose.