LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Premium >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Front Brake Hose Replacement >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

WARNING:

Refer to Brake Fluid Irritant Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
  3. GM3914265Courtesy of GENERAL MOTORS COMPANY

    Brake Pipe Fitting (1) - Disconnect

  4. GM3915933Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Retainer (1) - Remove

  5. GM3915937Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Grommet (1) - Release

  6. GM3946716Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Fitting Bolt (1) - Remove

  7. GM3946719Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not reuse the brake hose fitting gaskets.

    Brake Hose Fitting Gasket (1) [2x] @ Brake Hose Fitting (2) - Remove and DISCARD

  8. Plug the caliper inlet to prevent brake fluid loss and contamination.
  9. Remove the brake hose.
scientia non olet · About LEMON Manuals