Installation Procedure

Install the brake hose to the vehicle.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Install NEW brake hose fitting gaskets.

Brake Hose Fitting Gasket (1) [2x] @ Brake Hose Fitting (2) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Brake Hose Fitting Bolt (1) - Install 40 N.m (30 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Grommet (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Pipe Fitting (1) - Install 18 N.m (13 lb ft)
Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , and Hydraulic Brake System Bleeding (Pressure)
Install the tire and wheel assembly. Tire and Wheel Removal and Installation