Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Brake Master Cylinder Assembly (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Master Cylinder Nut (1) - Install and tighten [2x] 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Master Cylinder Primary Brake Pipe Fitting (1) - Install and tighten 25 N.m (18 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Master Cylinder Secondary Brake Pipe Fitting (1) - Install and tighten 25 N.m (18 lb ft)
Brake Fluid Level Indicator Switch - Connect
Radiator Surge Tank Replacement - Install
Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , and Hydraulic Brake System Bleeding (Pressure)