Rear Side Door Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures SIR Disabling and Enabling Mark the location of the hinge before removing the bolts with a grease pencil. Disconnect the electrical connector.
1	Rear Side Door Check Link Bolt CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Rear Side Door Lower Hinge Bolt [2x] Procedure Support the door before removing the hinge fastener. With the aid of an assistant, remove the door. Tighten 25 N.m (18 lb ft)
3	Rear Side Door Upper Hinge Bolt [2x] Tighten 25 N.m (18 lb ft)
4	Rear Side Door Procedure Transfer components as necessary. Rear Side Door Adjustment