Front Fender Replacement - Left Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Bumper Fascia Replacement Air Inlet Grille Panel Extension Replacement Front and Rear Side Door Opening Frame Reveal Molding Replacement Reposition the hood release cable. Reposition the windshield washer hose.
1	Front Fender Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Front Fender Bolt [7x] Tighten 9 N.m (80 lb in)
3	Front Fender Nut Tighten 9 N.m (80 lb in)
4	Headlamp Bolt [2x] Tighten 2.5 N.m (22 lb in)
5	Front Fender Procedure Transfer components as necessary.