Body Wiring Harness Junction Block Replacement

Fig 1: Body Wiring Harness Junction Block Components Location With Torque Specification

Courtesy of GENERAL MOTORS COMPANY

TIGHTENING TORQUE SPECIFICATIONS

Callout	Component Name
Preliminary Procedures Battery Negative Cable Disconnection and Connection . Quarter Lower Rear Trim Panel Replacement (Right Side) , or Quarter Lower Rear Trim Panel Replacement (Left Side)
1	Body Wiring Harness Junction Block Nut CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Body Wiring Harness Junction Block Procedure Disconnect all electrical connectors. Release the top retainer, tip the fuse block outward and pull the fuse block rearward out of the rear inner quarter panel.

Callout

Component Name

Preliminary Procedures

Body Wiring Harness Junction Block Nut

CAUTION:

Tighten
9 N.m (80 lb in)

Body Wiring Harness Junction Block

Procedure

Disconnect all electrical connectors.
Release the top retainer, tip the fuse block outward and pull the fuse block rearward out of the rear inner quarter panel.