Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Pedal Retainer |
| Master Cylinder Gasket |
| Master Cylinder Reservoir Seal |
SINGLE USE THREADED FASTENER/COMPONENT TIGHTENING TORQUE SPECIFICATION
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Master Cylinder Nut | 49 N.m (36 lb ft) |
| Master Cylinder Reservoir Bolt | 8 N.m (71 lb in) |
REUSABLE THREADED FASTENER TIGHTENING TORQUE SPECIFICATION
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose Bracket Nut - Front and Rear | 9 N.m (80 lb in) |
| Brake Hose Fitting Bolt - Front and Rear | 44 N.m (32 lb ft) |
| Brake Pedal Bracket Bolt | 15 N.m (11 lb ft) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Master Cylinder Reservoir Brake Pipe Fitting | 32 N.m (24 lb ft) |