Installation Procedure

Front Brake Hose - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Install NEW [2x]
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Hose Fitting Bolt (1) - Install and tighten 44 N.m (32 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Bracket Nut(1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Brake Pipe Fitting(1) - Install and tighten 18 N.m (13 lb ft)
Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)
Install the tire and wheel assembly. Tire and Wheel Removal and Installation